- Home
- Lights & Lighting
- Lighting Accessories
- 5PCS Waterproof 2Pin LED Connector and 3Meters UL1007 22 Gauge Conductor Line BLACK 10MM
Details
SIZE GUIDE:
Product size (L x W x H): 2.60 x 1.20 x 0.80 cm / 1.02 x 0.47 x 0.31 inches
Package size (L x W x H): 15.00 x 12.00 x 2.20 cm / 5.91 x 4.72 x 0.87 inches
1.Package of LED Strip Connector Include
5 PCS LED Strip Connector Terminal 8mm/10mm 2 Pin Waterproof
9.84 Feet / 3 Meter 22 Gauge 4 Conductor Extension Wire UL Listed
2.Special Benefit you can get with it.
Connect waterproof strip light without removing its surface glue coating. Save your time.
You will be no more limited by distance between strip light to Controller or dimmer. This connector allow you to cut any length wire according to project's actual requirement, then attach wire to connector easily without stripping insulation.
With 2 connector and a wire, you are able to DIY a strip-to-strip-jumper wire in order to extend strip light with any angle or direction. The length of this jumper wire can be decided by you fully.
No more worry strip light moving out of connector, the connector's teeth will pierce and grip the PCB tightly.
3.Tools needed to use
A pliers only
4.How to use (2 mode)
4-1 How to make a Strip-To-Strip-Bridge connector ?
Cut a wire for the length you want
Insert wire into connector's wire end
Clamp cap down
repeat step 1-3 to add another connector to the wire
4-2 How to make a Strip-To-Controller connector
Cut a wire for the length you want
Insert wire into connector's wire end 4-2 How to make a Strip-To-Controller connector
Cut a wire for the length you want
Insert wire into connector's wire end
Clamp cap down
5 PCS LED Strip Connector Terminal 8mm/10mm 2 Pin Waterproof
9.84 Feet / 3 Meter 22 Gauge 4 Conductor Extension Wire UL Listed
2.Special Benefit you can get with it.
Connect waterproof strip light without removing its surface glue coating. Save your time.
You will be no more limited by distance between strip light to Controller or dimmer. This connector allow you to cut any length wire according to project's actual requirement, then attach wire to connector easily without stripping insulation.
With 2 connector and a wire, you are able to DIY a strip-to-strip-jumper wire in order to extend strip light with any angle or direction. The length of this jumper wire can be decided by you fully.
No more worry strip light moving out of connector, the connector's teeth will pierce and grip the PCB tightly.
3.Tools needed to use
A pliers only
4.How to use (2 mode)
4-1 How to make a Strip-To-Strip-Bridge connector ?
Cut a wire for the length you want
Insert wire into connector's wire end
Clamp cap down
repeat step 1-3 to add another connector to the wire
4-2 How to make a Strip-To-Controller connector
Cut a wire for the length you want
Insert wire into connector's wire end 4-2 How to make a Strip-To-Controller connector
Cut a wire for the length you want
Insert wire into connector's wire end
Clamp cap down
Brand: ZDM
Accessory type: Connect Cable
Material: Copper,PVC
Accessory type: Connect Cable
Material: Copper,PVC
0.040
Package weight: 0.064 kg Product size (L x W x H): 2.60 x 1.20 x 0.80 cm / 1.02 x 0.47 x 0.31 inches
Package size (L x W x H): 15.00 x 12.00 x 2.20 cm / 5.91 x 4.72 x 0.87 inches
Package Contents: 5 x LED Strip Connector, 1 x Conductor Line
Additional Information
Color | N/A |
---|
Tell us what you think about this item!
※ We ship to over 200 countries worldwide through fast and reliable delivery partners. You can choose your preferred shipping method on the Order Information page during the checkout process.
Total Delivery Time = Processing Time + Shipping Time
Processing Time:Before we ship your order, we have to prepare your products, perform strict quality-control tests and package items carefully.
Standard Shipping: 7-15 business days
Flat Rate Shipping: 10-30 business days
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.